Span-Adhesive 5005

It is a white coloured Pre-mix Cementitious-Polymer-Based-powder, containing Portland cement and sand, which can be mixed with water for installing/fixing big Tiles & Stone on Interior and Exterior walls. With coverage of 50 To 55 Sqft at 6mm Thickness with a Notched Trowel. This highly flexible adhesive also has excellent waterproofing ability. When properly applied, it takes care of hollowness problems and is ideal for use in green buildings.

Product Specification

No.	Specification	Description
1	SIZE UPTO IN FEET	Any Size
2	TYPE	Ceramic, Vitrified, Mosaic Tile & Natural, Rough stone
3	APPLICATION AREA CLASSIFICATION	On terraces, wet rooms, balconies, swimming pools and bathrooms, Tile on Tile, High Elevation On waterproof and moisture proof layers
4	SURFACE	Concrete, Cement Mortar Beds, Cement Plaster, Brick Masonry, Block Masonry, Bison Board, tile Etc.
5	COVERAGE	30-35 sq. at 3 mm
6	HEIGHT IN FEET	100 Ft
7	OPEN TIME	30 Minutes
8	POT LIFE	60 Minutes
9	WATER RATIO	30-35% per 20 Kg bag
10	SETTING TIME	24-48 Hours
11	APPLICATION TEMPERATURE	5-50 Degree Celsius
12	BULK DENSITY	1400-1600 KG/m³
13	COLOUR	WHITE
14	TENSILE ADHESION DRY CONDITION	1.80 MPa
15	TENSILE ADHESION WET CONDITION	1.70 MPa
16	SHEAR ADHESION DRY CONDITION	6.20 N/mm2
17	SHEAR ADHESION HEAT AGING	3.23 N/mm2
18	SHEAR ADHESION WET CONDITION	NA
19	SLIP AVERAGE	.14 mm
20	DEFORMABLE ADHESIVE	6.20 mm
21	FOLLOWING STANDARD	ISO 9001:2015

Specification

Areas of Application

Fixing ceramic, vitrified, and natural stone tiles on floors and walls.
• Use in both indoor and outdoor applications.
• Suitable for bathrooms, kitchens, swimming pools, terraces, and other wet or dry areas.

Surface Preparation

Ensure the surface is clean, dry, level, and free from dust, oil, grease, or loose particles.
• Repair any cracks or uneven areas before application.
• Avoid application on surfaces with standing water or visible dampness.

Mixing Instructions

Mix the adhesive powder with clean water as per the manufacturer’s ratio to form a smooth, lump-free paste.
• Stir well to achieve a homogeneous consistency.
• Do not add excess water as it may weaken the adhesive properties.
• Let the mixture rest for a few minutes before application.

Application Method

Use a notched trowel to spread a thin, even layer of adhesive on the surface, working in small sections.
• Hold the trowel at a 45-degree angle to form ridges for improved bonding.
• Place tiles into the adhesive and gently press and twist for full contact.
• Use tile spacers to maintain uniform spacing.
• Adjust tiles while the adhesive is still wet.
• Clean off excess adhesive immediately.
• Allow adhesive to cure as per manufacturer’s recommended time before grouting.

Storage & Shelf Life

Store in a cool, dry place, away from direct sunlight and moisture.
• Keep the product in its original, tightly sealed packaging.
• Shelf life is typically 12 months from the date of manufacture under proper storage conditions.

Packaging

Available in:20kg

Safety & Precautions

Wear safety goggles, gloves, and a dust mask to prevent irritation and inhalation of dust.
• Ensure proper ventilation during application.
• Avoid skin and eye contact. Wash immediately with soap and water if contact occurs.
• Do not ingest or handle with food. Seek immediate medical help if swallowed.
• Clean tools immediately after use to prevent hardening.
• Keep out of reach of children and pets.
• Dispose of unused product and packaging as per local environmental regulations.
• Always check the compatibility of the adhesive with your specific tile and surface type.

Span-Adhesive 5005

Span-Adhesive 5005

Product Specification

Specification

Areas of Application

Surface Preparation

Mixing Instructions

Application Method

Storage & Shelf Life

Packaging

Safety & Precautions

Feature & Benefit

Contact Info

About Company

Important Links

Opening Hours