Application Method

• Use a notched trowel to spread a thin, even layer of adhesive on the surface, working in small sections.
  • Hold the trowel at a 45-degree angle to form ridges for improved bonding.
  • Place tiles into the adhesive and gently press and twist for full contact.
  • Use tile spacers to maintain uniform spacing.
  • Adjust tiles while the adhesive is still wet.
  • Clean off excess adhesive immediately.
  • Allow adhesive to cure as per manufacturer’s recommended time before grouting.

Safety & Precautions

• Wear safety goggles, gloves, and a dust mask to prevent irritation and inhalation of dust.
  • Ensure proper ventilation during application.
  • Avoid skin and eye contact. Wash immediately with soap and water if contact occurs.
  • Do not ingest or handle with food. Seek immediate medical help if swallowed.
  • Clean tools immediately after use to prevent hardening.
  • Keep out of reach of children and pets.
  • Dispose of unused product and packaging as per local environmental regulations.
  • Always check the compatibility of the adhesive with your specific tile and surface type.