- info@rakbuildtechsolution.com
- 098118 09825
It is a polymer modified cement-based floor and wall tile grey colored Adhesive specially for application of Ceramic Tiles, Vitrified Tiles, Porcelain Tiles, Double Charge Tiles, Marbles, Granite, Kota Stone, Glass mosaic, Fly Ash Bricks, Hollow Block etc. on internal, vertical/horizontal surfaces. This highly flexible adhesive also has excellent waterproofing ability. When properly applied, it takes care of hollowness problems and is ideal for use in green buildings.
Application: Suitable for Ceramic & vitrified tiles, Marble, Granite & Glass Mosaic on internal/external wall/floor, Swimming pools, Bathrooms, cement block etc.
| S. No. | Specification | Description |
|---|---|---|
|
1 |
SIZE UPTO IN FEET |
Any Size |
|
2 |
TYPE |
Ceramic, Vitrified, Mosaic Tile & Natural, Rough stone |
|
3 |
APPLICATION AREA CLASSIFICATION |
On terraces, wet rooms, balconies, swimming pools and bathrooms, Tile on Tile,
High elevation on waterproof and moisture proof layers
|
|
4 |
SURFACE |
Concrete, Cement Mortar Beds, Cement Plaster, Brick Masonry, Block Masonry,
Bison Board, tile Etc.
|
|
5 |
COVERAGE |
30-35 sq. at 3 mm |
|
6 |
HEIGHT IN FEET |
100 ft |
|
7 |
OPEN TIME |
30 Minutes |
|
8 |
POT LIFE |
60 Minutes |
|
9 |
WATER RATIO |
30-35% per 20 Kg bag |
|
10 |
SETTING TIME |
24-48 Hours |
|
11 |
APPLICATION TEMPRATURE |
5-50 Degree Celsius |
|
12 |
BULK DENSITY |
1400-1600 KG/m³ |
|
13 |
COLOR |
Grey |
|
14 |
TENSILE ADHESION DRY CONDITION |
1.80 MPa |
|
15 |
TENSILE ADHESION WET CONDITION |
1.70 MPa |
|
16 |
SHEAR ADHESION DRY CONDITION |
6.20 N/mm2 |
|
17 |
SHEAR ADHESION HEAT AGING |
3.23 N/mm2 |
|
18 |
SHEAR ADHESION WET CONDITION |
NA |
|
19 |
SLIP AVERAGE |
.14 mm |
|
20 |
DEFORMABLE ADHESIVE |
6.20 mm |
|
21 |
FOLLOWING STANDARD |
ISO 9001:2015 |
• Fixing ceramic, vitrified, and natural stone tiles on floors and walls.
• Use in both indoor and outdoor applications.
• Suitable for bathrooms, kitchens, swimming pools, terraces, and other wet or dry areas.
• Ensure the surface is clean, dry, level, and free from dust, oil, grease, or loose particles.
• Repair any cracks or uneven areas before application.
• Avoid application on surfaces with standing water or visible dampness.
• Mix the adhesive powder with clean water as per the manufacturer’s ratio to form a smooth, lump-free paste.
• Stir well to achieve a homogeneous consistency.
• Do not add excess water as it may weaken the adhesive properties.
• Let the mixture rest for a few minutes before application.
• Use a notched trowel to spread a thin, even layer of adhesive on the surface, working in small sections.
• Hold the trowel at a 45-degree angle to form ridges for improved bonding.
• Place tiles into the adhesive and gently press and twist for full contact.
• Use tile spacers to maintain uniform spacing.
• Adjust tiles while the adhesive is still wet.
• Clean off excess adhesive immediately.
• Allow adhesive to cure as per manufacturer’s recommended time before grouting.
• Store in a cool, dry place, away from direct sunlight and moisture.
• Keep the product in its original, tightly sealed packaging.
• Shelf life is typically 12 months from the date of manufacture under proper storage conditions.
Available in:20kg
• Wear safety goggles, gloves, and a dust mask to prevent irritation and inhalation of dust.
• Ensure proper ventilation during application.
• Avoid skin and eye contact. Wash immediately with soap and water if contact occurs.
• Do not ingest or handle with food. Seek immediate medical help if swallowed.
• Clean tools immediately after use to prevent hardening.
• Keep out of reach of children and pets.
• Dispose of unused product and packaging as per local environmental regulations.
• Always check the compatibility of the adhesive with your specific tile and surface type.
Our Support team is available 24 /7 to answer your queries
Copyright © 2025-26 RAK Buildtech Solution Private Limited, All rights reserved. Powered by: NET Xperia